From: "Milton Aupperle" <milton@outcastsoft.com>
Date: October 20, 2005 4:43:04 PM MDT
To: Astro_IIDC@yahoogroups.com
Subject: Re: Grid Pattern
Hi Folks;
Just for closures sake, Duane and I sorted the Grid Pattern problem out.
Basically the problem was the Saturation setting being at 23. It
should really be left at between 30 and 34 and not moved outside that
range.
Although I had originally considered removing Saturation altogether,
being able to adjust it allows you to compensate for differences in
low end cameras (only those cameras have Saturation). If I had hard
coded it at say 32 (which is the best value with the Unibrain cameras
I have here), then the pattern might be still be visible for another
camera and maybe it really needs to be at say 33 or 30. This way at
least you can change it to compensate.
So if your using one of the lowere cost IIDC Color Cameras (ADS Pyro,
iBot, APLux, Unibrain) etc., then set the Saturation at 30 to 34 and
you waon't have hsi problem at all.
Hope That Helps..
PS: This might also explain what is happenign with the monochrome
Unibrain cameras too - I'll have to investiagte to see if the TSLV1501
chip is doing saturation processing for monochrome images.