From: "jimchung2338" <jim_chung@sunshine.net>
Date: November 14, 2005 7:23:08 AM MST
To: Astro_IIDC@yahoogroups.com
Subject: Unibrain Adaptor
Thanks to everyone for their insightful comments regarding Mars
imaging. I am imaging through IR blocking filter but will turn down
my red gain and see if more details resolve. I'm expecting my JMI
Motofocuser soon which will really help, I finally understand what
the fuss is with Feathertouch focusers and the like!
Earlier I had mentioned using electrical conduit pieces to make a
Unibrain adaptor - they are pieces one screws into junction boxes to
allow the straight conduits pipes to mate up. Dirt cheap and found
in any Home Depot but you will need to slightly enlarge the opening
on the Unibrain (I scraped it a few times with a penknife) and also
to sand down the conduit piece to 1.25".
Like Milton I had hot glue gunned some plumbing pieces but while
imaging at 3 Celsuis the glue debonded and swearing could be heard
following the falling pieces!
http://groups.yahoo.com/group/Astro_IIDC/files/Other/unibrain1.jpg
http://groups.yahoo.com/group/Astro_IIDC/files/Other/unibrain2.jpg