From: "Alan Friedman" <alan@greatarrow.com>
Date: September 4, 2006 11:22:04 AM MDT
To: <Astro_IIDC@yahoogroups.com>
Subject: Re: [Astro_IIDC] Questions on FireWire Camera Purchase
Reply-To: <alan@greatarrow.com>
Hi David -
Maybe you want to consider a monochrome camera and filterwheel? You would
notice the increased sensitivity of the monochrome DMK cameras over your
ToUcam.
Adirondack Astronomy and Scopetronix are two good sources for the 1.25"
Cmount nosepiece.
best wishes -
Alan
---------- Original Message ----------------------------------
From: "David Illig" <usenet@davidillig.com>
Reply-To: Astro_IIDC@yahoogroups.com
Date: Mon, 04 Sep 2006 03:28:38 -0000
---------- Original Message ----------------------------------
My old ToUCam (USB) has died and my iBot (FW) is OK, but no
better than OK, on a 'scope, so I'm thinking about buying an
Imaging Source DFK 21AF04 color FireWire camera. I would
appreciate help with the following questions:
The product list at 1394imaging.com also shows a DFK 21BF04,
which differs from the DFK 21AF04 in that it has "Trig" and I/O
(and costs a bit more.) What is "trig?" I assume it means
"triggering," but I don't know what that means outside of the
oscilloscope milieu and I don't know if these features are something
that I need.
This camera is not listed as supported on the Milton's site, but
its siblings, presumably very similar, are listed. Is it a safe guess
that this camera will work with Astro IIDC ?
The Imaging Source site says these cameras have a "C/CS" mount.
What is the name of the nosepiece needed to mate this camera
to a 2" port (or 1-1/4" reducer) on an SCT and who sells it?
Finally, I note that this company is in Germany. Does it take a long
time to get one of these cameras? (I'm thinking about going to
AstroFest on 20 September and would like to have it by then -- my
first use would be guiding with Equinox 5.)
Many thanks,
David