From: "Christoph Bosshard" <chboss@hispeed.ch>
Date: April 27, 2008 9:05:28 AM MDT
To: Astro_IIDC@yahoogroups.com
Subject: Odd problem when using sharpening before stacking
Finally the sky was cooperative so I could image Saturn.
Before I started imaging I installed the latest 4.003 Version.
Strangely I needed to reinstall the Bayer codec before it would record
a movie. Seems like the old version does not work with the IIDC
version 4.003?
However finally I got around this small problem.
Today when I tried to stack the movies I ran into a strange problem
that resulted in "false" colour images after stackting.
After experimenting with the settings I found that the option
"Sharpening before stacking" was the reason for the strange results.
It seems to happen only at the setting "Medium-High", lower settings
seem to be OK.
I used the same setting on the older versions without problems.
I uploaded an example showing the problem:
http://f1.grp.yahoofs.com/v1/8JQUSDHh89tFBo2aXXW92m43Rzdsf3daQrF3pz1M5Eko2taYFxO7A6hD87_0JCDk5JKKJ_xyM2AZYBDPxxXTPJgneotkF33b/Planetary/Astro_IIDC_4003_problem.jpg
best regards
Chris