From: Mark Gaffney <markgaffney@mac.com>
Date: July 3, 2008 8:24:07 PM MDT
To: Astro_IIDC@yahoogroups.com
Subject: Re: [Astro_IIDC] Re: IR/UV filter...
Hi Milton, seems shifting the camera/nosepiece inside the eyepiece holder won`t work for trees in the sunlight through the 10". Too much light for the camera without a filter perhaps? I can bring the 20mm eyepiece into focus on nearer objects this way though. Mark.
On 03/07/2008, at 10:47 PM, Milton Aupperle wrote:
Hi Mark;
No it wouldn't cause that. It primarily blocks off infra red light
which causes color balance issues (mainly lunar / solar, but Planetary
too like Jupiter) and also improves sharpness as IR light comes into
focus at a different point than visible light.
Usually when you can't find objects it's because the finder and the
camera / scope are not pointing at the same place. The small field of
view at prime focus with most scopes allows for very tight tolerance
in alignment. After I remove the coverings on my scope, I usually have
to re-adjust the Finder scope so that the finder and camera point to
the same object. I usually do this right before dusk and site them in
on a dsitant terrestrial object.
HTH..
Milton Aupperle
--- In Astro_IIDC@yahoogroups.com, "Mark Gaffney" <markgaffney@...> wrote:
Hi Milton & others,I`m wondering if the lack of the above filter on
my IS DBK 21A F04.AS
would be affecting my ability to acquire stars in the camera window
of Astro IIDC. I`ve tried a
couple of times with my NexStar 4SE (as it`s easier to set-up) but
haven`t had any success
with more difficult objects. I`ll have to have another go with
Jupiter as I acquired it 2-3
months ago although quite overexposed with little chance it seems of
adjustment. Now that
my Firewire port has luckily started working again I can devote some
funds to a Baader filter
by the end of the month! Mark.
------------------------------------
Yahoo! Groups Links