From: Mark Gaffney <markgaffney@mac.com>
Date: July 4, 2008 8:16:36 AM MDT
To: Astro_IIDC@yahoogroups.com
Subject: Re: [Astro_IIDC] Re: IR/UV filter...
Hi Milton, Here`s the scope;
I was wondering if something like this might work; http://www.myastroshop.com.au/products/details.asp?id=MAS-347 I`m not getting any image of a star at all at present inside the FWHM/HFD rings? I`ve taken moon images with both scopes, the 4SE is in the background of the picture. Mark.
On 04/07/2008, at 11:47 PM, Milton Aupperle wrote:
Hi Mark;
On 3-Jul-08, at 8:24 PM, Mark Gaffney wrote:
Hi Milton, seems shifting the camera/nosepiece inside the eyepiece
holder won`t work for trees in the sunlight through the 10". Too much
light for the camera without a filter perhaps?
Most likely yes, especially since sunlight has a lot of infrared
light in it too.
I can bring the 20mm
eyepiece into focus on nearer objects this way though. Mark.
The puzzling thing to me is that you did shoot some lunar images
previously, which seemed to be pretty close to focus. Or was that
taken with a different Telescope than this one?
I believe your 10" is a newtonian, right? If you put a bright star
in the field of view you twist the focus knob back and forth, you can
usually see the star go from larger diameter (out of focus larger
FWHM/HFD values) to smaller diameter (smaller FWHM/HFD values) and if
you continue twisting it then it once again becomes a large star again.
If your not seeing that sort of behavior, the 10" might not have
enough travel distance on the focuser then, either in or out to bring
it into focus.
HTH..
Milton Aupperle
On 03/07/2008, at 10:47 PM, Milton Aupperle wrote:
Hi Mark;
No it wouldn't cause that. It primarily blocks off infra red light
which causes color balance issues (mainly lunar / solar, but
Planetary
too like Jupiter) and also improves sharpness as IR light comes into
focus at a different point than visible light.
Usually when you can't find objects it's because the finder and the
camera / scope are not pointing at the same place. The small field of
view at prime focus with most scopes allows for very tight tolerance
in alignment. After I remove the coverings on my scope, I usually
have
to re-adjust the Finder scope so that the finder and camera point to
the same object. I usually do this right before dusk and site them in
on a dsitant terrestrial object.
HTH..
Milton Aupperle
--- In Astro_IIDC@yahoogroups.com, "Mark Gaffney" <markgaffney@...>
wrote:
Hi Milton & others,I`m wondering if the lack of the above filter on
my IS DBK 21A F04.AS
would be affecting my ability to acquire stars in the camera window
of Astro IIDC. I`ve tried a
couple of times with my NexStar 4SE (as it`s easier to set-up) but
haven`t had any success
with more difficult objects. I`ll have to have another go with
Jupiter as I acquired it 2-3
months ago although quite overexposed with little chance it seems of
adjustment. Now that
my Firewire port has luckily started working again I can devote some
funds to a Baader filter
by the end of the month! Mark.
------------------------------------
Yahoo! Groups Links