From: Rodolphe Pineau <pineau@rti-zone.org>

Date: December 7, 2009 12:29:08 AM MST

To: Astro_IIDC@yahoogroups.com

Subject: Re: [Astro_IIDC] C-mount Scorpion...



On Dec 6, 2009, at 18:26, Mark Gaffney wrote:




Thanks Rodolphe, 

I wondered if that small Allen key was part of the picture. It says on mine it`s for adjusting the back focal length from the standard CS lens one? I`ll look at it in the cool of the evening-must be near 100 degrees F here now (Australia!)


Mark


It is to unlock the ring so that you can turn it to adjust the back focal. If it's not properly tight, the ring will move in the way you describe.


Rodolphe



On 07/12/2009, at 12:20 PM, Rodolphe Pineau wrote:


There is a small hole at the bottom of the camera directly under the ring. The camera should have come with a small Allen key taped to a piece of paper (yellow in my case) explaining how to tighten the screw to lock the ring.


The Allen key is a 1/28 inch one (0.035" from the scorpion Getting Started manual).


Rodolphe


On Dec 6, 2009, at 14:59, Mark Gaffney wrote:


My Scorpion 20S0 mono camera seems to have a slightly loose C-mount 

bracket (see attachment) It moves a few millimetres side to side as 

I`m doing up the nosepiece. How are these tightened, does anyone know?



Mark.



--


| Rodolphe Pineau RTI-Zone |

| http://www.rti-zone.org/ |

| Robotics / Unix / Mac OS X / Astronomy |








--


|        Rodolphe Pineau    RTI-Zone        |

|         http://www.rti-zone.org/          |

|   Robotics / Unix / Mac OS X / Astronomy  |